Your Cart is Empty
Menu
Build your own 2015+ WRX Short Shifter Kit here!
If you already have certain short shifter components installed in your 2015+ WRX and are looking to finish your shifter upgrades, you can choose which items you specifically need!
WILL NOT FIT STI.
If you're looking for the entire kit, you can purchase here.
Choose from our:
Our Short Throw Shifters reduce throw by ~35%. Our Shifter Plates reduce throw by ~30%. When the two are combined, throw is reduced by ~55%.
Purchase the Shifter Stop to compliment the Short Throw Shifter and purchase the Shifter Bushing to compliment the Shifter Plate.
Short Throw Shifter:
Our Short Shifter features the shortest shifts compared to all other 2015+ WRX Short Shifters on the market. We also designed our Short Shifter to be more comfortable and ergonomic than others (no hitting your hand on the e-brake handle when shifting into second). The included Reverse Lockout is CNC machined from 6061 and anodized for a vibrant and durable finish. The Shifter Rod is machined from 304 SS. SS Hardware is included. We also include o-rings in the reverse lockout assembly to eliminate rattle (o-rings will need to be lubricated, we recommend 3-in-1 oil.
Shifter Stop:
Our Shifter Stop is designed to significantly reduce the amount of slop when in 1st and 2nd gear by limiting (or stopping) the lateral movement. When adjusted correctly, 1st and 2nd gear can be easily engaged with a very precise feel.
Shifter Plate:
The Billetworkz Short Shifter Transmission Plate replaces the factory shifter plate, but reduces the shift throw by changing the pivot points. Our short shifter plate is designed to be slightly heavier than the factory shifter plate (without being too heavy) to offset the shorter throw. (935 grams)
Shifter Bushing:
Haven't driven it much since installation, but it's a beauty to look at for sure.
love it!!!shifts are so much better.paired with a weighted shift knob so clean.
Yes! The Short Shifter, Shifter Plate, Shift Stop, and Shifter Bushing for the 2015+ WRX Kit all fit perfectly into the 2nd generation Crosstrek!
INSTALLATION:
Install was a breeze, with no issues and was able to complete it in my garage with a set of ramps and chock blocks (with a 2” lift) though it is very important to have the proper tools such as, the snap ring pliers and a punch. You can get away with using needle nose pliers on the snap ring. But with out a punch, the Short Shifter and Shifter plate will be impossible. The install video that Billetworkz provided on YT, applies almost perfectly to the Crosstrek. The only slight difference is the removal of the center console. But seriously, overall one of the smoothest installs I’ve completed.
Now, the review on the entire kit itself.
FUNCTIONALITY:
I ABSOLUTELY LOVE IT! I now again have that short throw, and notchy mechanical feel as I have and love in my older cars. For reference it feels comparable to my S2000’s (OEM) shift throws now. Which is insane to think about! I have this kit paired up with the Billetworkz Extension and Shift Knob, and even with that the throws are shorter compared to OEM.
All of the slop going into 1st and 2nd is virtually nonexistent now! The only amount of give I get is going into 5th. Due to the factory shift stop/reverse lock out stop. Naturally it can’t be angled to suit both 5th and 6th to be solid. But in 6th gear you will be able to fine tune it, making it solid. Makes me wonder if Billetworkz will be planning to make one for the other side, and if they do, I’m definitely getting it!
Over all the craftsmanship, attention to detail, in their products is stellar! And being quick to ship is the cherry on top!
I have a 2010 6speed outback and got this short shifter kit. Every piece fit because they share the same parts with the wrx. The shifter feels great and feels like a dramatic reduction. Highly recommend if you have a manual outback 2010-11. Cannot promise it'll fit after words due to the slight change in drivetrain.
Billetworkz Short Throw Shifter, Billetworkz Shift Plate, Perrin Shift Stop, and Perrin Shifter Bushing. Each of these parts has improved the shift feel a ton. Super short, doesn't even feel like the shifter moves. Feels very tight, and takes much more effort to move it between gears, but I no longer have that "shifting through a bag of rocks" feel in my shifter.
I'd say if you don't want TOO short, maybe consider just getting the Shift Plate without the shifter.
Experience a reduction in shifter throw, allowing for quicker and more precise gear selection.
Crafted from high-grade billet 304 stainless steel and 6061 aluminum, this short shifter is built to last, providing a solid and direct shift feel.
Our Short Shiftes are designed for a straightforward installation process, enabling a quick upgrade with basic tools.
Engineered for perfection, our short shifter will seamlessly integrate with your vehicle's system.
Haven't driven it much since installation, but it's a beauty to look at for sure.
love it!!!shifts are so much better.paired with a weighted shift knob so clean.
Yes! The Short Shifter, Shifter Plate, Shift Stop, and Shifter Bushing for the 2015+ WRX Kit all fit perfectly into the 2nd generation Crosstrek!
INSTALLATION:
Install was a breeze, with no issues and was able to complete it in my garage with a set of ramps and chock blocks (with a 2” lift) though it is very important to have the proper tools such as, the snap ring pliers and a punch. You can get away with using needle nose pliers on the snap ring. But with out a punch, the Short Shifter and Shifter plate will be impossible. The install video that Billetworkz provided on YT, applies almost perfectly to the Crosstrek. The only slight difference is the removal of the center console. But seriously, overall one of the smoothest installs I’ve completed.
Now, the review on the entire kit itself.
FUNCTIONALITY:
I ABSOLUTELY LOVE IT! I now again have that short throw, and notchy mechanical feel as I have and love in my older cars. For reference it feels comparable to my S2000’s (OEM) shift throws now. Which is insane to think about! I have this kit paired up with the Billetworkz Extension and Shift Knob, and even with that the throws are shorter compared to OEM.
All of the slop going into 1st and 2nd is virtually nonexistent now! The only amount of give I get is going into 5th. Due to the factory shift stop/reverse lock out stop. Naturally it can’t be angled to suit both 5th and 6th to be solid. But in 6th gear you will be able to fine tune it, making it solid. Makes me wonder if Billetworkz will be planning to make one for the other side, and if they do, I’m definitely getting it!
Over all the craftsmanship, attention to detail, in their products is stellar! And being quick to ship is the cherry on top!
I have a 2010 6speed outback and got this short shifter kit. Every piece fit because they share the same parts with the wrx. The shifter feels great and feels like a dramatic reduction. Highly recommend if you have a manual outback 2010-11. Cannot promise it'll fit after words due to the slight change in drivetrain.
Billetworkz Short Throw Shifter, Billetworkz Shift Plate, Perrin Shift Stop, and Perrin Shifter Bushing. Each of these parts has improved the shift feel a ton. Super short, doesn't even feel like the shifter moves. Feels very tight, and takes much more effort to move it between gears, but I no longer have that "shifting through a bag of rocks" feel in my shifter.
I'd say if you don't want TOO short, maybe consider just getting the Shift Plate without the shifter.
